Comment:	San Fernando
Mic-E message:	In service
Last beacon:	XE2G/R
Location:	24°50.28' N 98°08.65' W - lokaator EL04WU21QC - show map 1.5 km Kagusse peiling 156° from San Fernando, Tamaulipas, Mexico [?] 76.4 km Kirdesse peiling 25° from Santander Jiménez, Tamaulipas, Mexico 133.0 km Edelasse peiling 209° from Heroica Matamoros, Tamaulipas, Mexico 134.9 km Edelasse peiling 209° from Brownsville, Cameron County, Texas, United States
Last position:	2025-05-01 06:30:34 UTC (3m6s ago) 2025-05-01 00:30:34 CST local time at San Fernando, Mexico [?]
Course:	0°
Speed:	0 km/h
Device:	Kenwood: TM-D700 (rig)
Last path:	XE2G-4>R4UP2X via WIDE1-1,WIDE2-1,qAR,XE2G-1
Positions stored:	7
Other SSIDs:	XE2G-1 XE2G-B XE2G-14 XE2G-2 XE2G-9 XE2G-7 XE2G-10 XE2G XE2G-3 XE2G-11 XE2G-A XE2G-5 XE2G-20 XE2G-15
Last heard a station directly:	2025-03-30 09:37:15 UTC (31d 20h56m ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.