Comment:	IGATE Yankton, SD XASTIR-Linux
Location:	42°53.81' N 97°32.24' W - lokaator EN12FV55MF - show map 11.8 km Läände peiling 284° from Yankton, Yankton County, South Dakota, United States [?] 28.6 km Idast peiling 112° from Tyndall, Bon Homme County, South Dakota, United States 99.3 km Edelasse peiling 223° from Sioux Falls, Minnehaha County, South Dakota, United States 102.8 km Loodesse peiling 296° from Sioux City, Woodbury County, Iowa, United States
Last position:	2025-03-17 08:16:24 UTC (3m9s ago) 2025-03-17 03:16:24 CDT local time at Yankton, United States [?]
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	WA0GMH-3>APX204 via TCPIP*,qAC,T2MCI
Positions stored:	1
Other SSIDs:	WA0GMH-1 WA0GMH-9 WA0GMH-N WA0GMH-2
APRS igate – Statistics for 2025-03:
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-03-16 23:10:08 UTC (9h9m ago)
Position packets heard directly:	6 on radio path
Position packets sent to APRS-IS:	31 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.