Comment:	igate / digipeater using Raspberry pi zero W2 Rx on 144.390
Location:	12°53.44' N 77°32.31' E - lokaator MK82SV43OS - show map 10.8 km Edelasse peiling 214° from Bangalore, Karnātaka, India [?] 26.2 km Loodesse peiling 320° from Anekal, Karnātaka, India 117.7 km Kirdesse peiling 56° from Mysore, Karnātaka, India
Last position:	2025-09-03 07:11:14 UTC (53m23s ago) 2025-09-03 12:41:14 IST local time at Bangalore, India [?]
Device:	WB2OSZ: DireWolf
Last path:	VU3KEB-10>APDW17 via TCPIP*,qAC,T2TAIWAN
Positions stored:	4
Other SSIDs:	VU3KEB-9 VU3KEB-B VU3KEB-7 VU3KEB-5 VU3KEB VU3KEB
APRS igate – Statistics for 2025-09:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-09-03 07:53:50 UTC (10m47s ago)
Position packets heard directly:	68 on radio path
Position packets sent to APRS-IS:	68 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.