Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	34°53.91' S 138°38.83' E - lokaator PF95HC74PJ - show map 2.4 km Kagusse peiling 154° from Klemzig, Port Adelaide Enfield, South Australia, Australia [?] 2.4 km Edelasse peiling 227° from Campbelltown, Campbelltown, South Australia, Australia 5.5 km Kirdesse peiling 53° from Adelaide, Adelaide, South Australia, Australia 5.7 km Läände peiling 284° from Adelaide Hills, Adelaide Hills, South Australia, Australia
Last position:	2025-07-30 10:51:06 UTC (8h5m ago) 2025-07-30 20:21:06 ACST local time at Klemzig, Australia [?]
Altitude:	40 m
Speed:	8 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	VK5UJ-9>APLRT1 via WIDE1-1,qAO,VK5UJ-2
Positions stored:	3948
Other SSIDs:	VK5UJ-2 VK5UJ-5 VK5UJ-8

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.