Comment:	.
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2023.07.12
Location:	35°09.11' S 149°08.91' E - lokaator QF44NU73TN - show map 8.4 km Kirdesse peiling 28° from Kaleen, Canberra, Australia [?] 9.3 km Kirdesse peiling 39° from Belconnen, Canberra, Australia 14.7 km Põhja peiling 7° from Canberra, Canberra, Australia 23.8 km Põhja peiling 341° from Queanbeyan, Queanbeyan, New South Wales, Australia
Last position:	2025-09-01 06:42:45 UTC (4h5m ago) 2025-09-01 16:42:45 AEST local time at Kaleen, Australia [?]
Altitude:	680 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	VK1MIC-6>APLRT1 via VK1MT-2*,qAO,VK2ZSZ-1
Positions stored:	33794
Other SSIDs:	VK1MIC-11 VK1MIC-10 VK1MIC-9 VK1MIC-1 VK1MIC-14 VK1MIC-5 VK1MIC-DP VK1MIC-7 VK1MIC-15 VK1MIC-2 VK1MIC-3 VK1MIC-5 VK1MIC-8

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.