Comment:	LoRa-APRScube 1Watt
Last status:	APRScube (GPS, 30dBm)
Location:	49°44.18' N 18°00.70' E - lokaator JN99AR16JR - show map 2.2 km Lõunasse peiling 188° from Bílovec, Czech Republic [?] 5.0 km Läände peiling 287° from Studénka, Czech Republic 92.9 km Edelasse peiling 232° from Katowice, Silesian Voivodeship, Poland 117.9 km Kirdesse peiling 59° from Brno, South Moravian Region, Czech Republic
Last position:	2025-04-23 10:33:47 UTC (5s ago) 2025-04-23 12:33:47 CEST local time at Bílovec, Czech Republic [?]
Altitude:	309 m
Speed:	94 km/h
Device:	DL3DCW: APRScube
Last path:	OK2ULQ-9>APLC13 via qAO,OK0BDL-10
Positions stored:	1148
Other SSIDs:	OK2ULQ-11 OK2ULQ-1 OK2ULQ-7 OK2ULQ-8 OK2ULQ-10

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.