Comment:	Arduino APRS Tracker
Location:	41°27.04' N 13°47.96' E - lokaator JN61VK58WD - show map 8.7 km Kirdesse peiling 24° from Castelnuovo Parano, Provincia di Frosinone, Latium, Italy [?] 10.8 km Põhja peiling 22° from Ausonia, Provincia di Frosinone, Latium, Italy 78.3 km Loodesse peiling 331° from Napoli, Provincia di Napoli, Campania, Italy 119.8 km Kagusse peiling 114° from Roma, Provincia di Roma, Latium, Italy
Last position:	2025-11-06 07:00:34 UTC (2h55m ago) 2025-11-06 08:00:34 CET local time at Castelnuovo Parano, Italy [?]
Altitude:	67 m
Speed:	60 km/h
Device:	Unknown: Experimental
Last path:	IZ0CWW-9>APZMDM via WIDE1-1,WIDE2-2,qAR,IQ0MA-2
Positions stored:	13866
Other SSIDs:	IZ0CWW-12 IZ0CWW-B IZ0CWW-15 IZ0CWW-2 IZ0CWW-7 IZ0CWW-4 IZ0CWW-3 IZ0CWW

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.