Comment:	test aprs . beeacon CW 432.407 mhz .
Location:	45°36.22' N 10°30.41' E - lokaator JN55GO04TV - show map 1.7 km Kagusse peiling 123° from Roè Volciano, Provincia di Brescia, Lombardy, Italy [?] 2.0 km Läände peiling 254° from Salò, Provincia di Brescia, Lombardy, Italy 42.6 km Loodesse peiling 296° from Verona, Provincia di Verona, Veneto, Italy 103.7 km Idast peiling 81° from Milan, Province of Milan, Lombardy, Italy
Last position:	2025-09-02 15:34:11 UTC (18h21m ago) 2025-09-02 17:34:11 CEST local time at Roè Volciano, Italy [?]
Device:	Open Source: APRSdroid (app, Android)
Last path:	IW2NKC>APDR16 via WIDE1-1,WIDE2-1,qAR,IR2DD
Positions stored:	6045
Other SSIDs:	IW2NKC-1 IW2NKC-10

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.