Comment:	IW2HJT Batt=0.00V Ext=16.08V
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-08-04
Location:	45°48.44' N 9°25.26' E - lokaator JN45RT03MS - show map 3.6 km Kagusse peiling 144° from Pescate, Provincia di Lecco, Lombardy, Italy [?] 5.6 km Kagusse peiling 155° from Lecco, Provincia di Lecco, Lombardy, Italy 42.2 km Kirdesse peiling 25° from Milan, Province of Milan, Lombardy, Italy 70.0 km Loodesse peiling 297° from Brescia, Provincia di Brescia, Lombardy, Italy
Last position:	2025-09-03 12:49:16 UTC (1h27m ago) 2025-09-03 14:49:16 CEST local time at Pescate, Italy [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IW2HJT-11>APLRG1 via WIDE2-2,qAR,IR2UDW-10
Positions stored:	4
Other SSIDs:	IW2HJT-10 IW2HJT-7 IW2HJT-9
APRS igate – Statistics for 2025-09:
Position packets sent to APRS-IS:	10 – show map

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.