Comment:	OP.ANGELO
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	46°05.92' N 12°05.03' E - lokaator JN66BC03BQ - show map 1.9 km Edelasse peiling 223° from Sedico, Provincia di Belluno, Veneto, Italy [?] 3.4 km Idast peiling 68° from Santa Giustina, Provincia di Belluno, Veneto, Italy 75.7 km Põhja peiling 346° from Venice, Provincia di Venezia, Veneto, Italy 112.0 km Kirdesse peiling 48° from Verona, Provincia di Verona, Veneto, Italy
Last position:	2025-09-02 18:08:57 UTC (1d 2h28m ago) 2025-09-02 20:08:57 CEST local time at Sedico, Italy [?]
Altitude:	312 m
Speed:	10 km/h
Last telemetry:	2025-09-02 18:07:24 UTC (1d 2h29m ago) – show telemetry Voltage: 387 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	IU3OUZ-9>APLRT1 via WIDE1-1,qAR,IQ3FL-10
Positions stored:	40
Other SSIDs:	IU3OUZ-D IU3OUZ IU3OUZ-10 IU3OUZ-N IU3OUZ-1 IU3OUZ-C

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.