Comment:	73. IGATE2 App.
Last beacon:	Using IGate2
Location:	41°48.05' N 12°42.05' E - lokaator JN61IT42CE - show map 2.1 km Edelasse peiling 223° from Monte Porzio Catone, Provincia di Roma, Latium, Italy [?] 3.2 km Kagusse peiling 123° from Frascati, Provincia di Roma, Latium, Italy 20.8 km Kagusse peiling 120° from Roma, Provincia di Roma, Latium, Italy 40.8 km Loodesse peiling 336° from Latina, Provincia di Latina, Latium, Italy
Last position:	2025-04-26 14:21:34 UTC (4d 7h42m ago) 2025-04-26 16:21:34 CEST local time at Monte Porzio Catone, Italy [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.0 m.
Last path:	IU0QWK-4>BEACON via TCPIP*,qAC,FIRST
Positions stored:	6
Other SSIDs:	IU0QWK-7 IU0QWK-9 IU0QWK-3 IU0QWK-5 IU0QWK-2 IU0QWK-1 IU0QWK-6 IU0QWK IU0QWK-10 IU0QWK-11 IU0QWK-15 IU0QWK-40

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.