Comment:	LoRa_APRS_Digirepeater (Batt=4.22V) (Ext V=11.64V)
Location:	46°04.19' N 10°19.14' E - lokaator JN56DB86GS - show map 2.3 km Kagusse peiling 117° from Paisco Loveno, Provincia di Brescia, Lombardy, Italy [?] 2.5 km Läände peiling 252° from Cedegolo, Provincia di Brescia, Lombardy, Italy 88.1 km Loodesse peiling 324° from Verona, Provincia di Verona, Veneto, Italy 110.4 km Kirdesse peiling 52° from Milan, Province of Milan, Lombardy, Italy
Last position:	2025-09-01 12:45:32 UTC (7m38s ago) 2025-09-01 14:45:32 CEST local time at Paisco Loveno, Italy [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IR2DI>APLRG1 via WIDE1-1,qAO,IZ2PAG-10
Positions stored:	14
Last heard a station directly:	2025-08-31 22:37:25 UTC (14h15m ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.