Comment:	LoRa APRS & IGate - TBeam UHF - CA2RXU firmware
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025.01.02
Location:	45°15.91' N 5°52.02' E - lokaator JN25WG43AP - show map 703.7 m Lõunasse peiling 168° from Bernin, Département de l'Isère, Rhône-Alpes, France [?] 2.1 km Edelasse peiling 205° from Crolles, Département de l'Isère, Rhône-Alpes, France 95.9 km Kagusse peiling 124° from Lyon, Département du Rhône, Rhône-Alpes, France 106.3 km Lõunasse peiling 192° from Genève, Geneva, Geneva, Switzerland
Last position:	2025-09-03 20:05:05 UTC (12m51s ago) 2025-09-03 22:05:05 CEST local time at Bernin, France [?]
Last telemetry:	2025-09-02 11:30:54 UTC (1d 8h47m ago) – show telemetry Ch 1: 0, Ch 2: 0, Ch 3: 0, Ch 4: 0, Ch 5: 0
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	F1BLZ-10>APLRG1 via TCPIP*,qAC,T2UKRAINE
Positions stored:	5
Other SSIDs:	F1BLZ

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.