Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	52°27.22' N 7°48.36' E - lokaator JO32VK68RV - show map 4.4 km Kirdesse peiling 59° from Voltlage, Lower Saxony, Germany [?] 5.1 km Loodesse peiling 324° from Neuenkirchen, Lower Saxony, Germany 106.9 km Põhja peiling 13° from Dortmund, North Rhine-Westphalia, Germany 123.9 km Kirdesse peiling 26° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-09-02 18:04:53 UTC (14h10m ago) 2025-09-02 20:04:53 CEST local time at Voltlage, Germany [?]
Altitude:	51 m
Speed:	2 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL0GAS-10>APLRT1 via WIDE1-1,qAO,DB0DAM-12
Positions stored:	845
Other SSIDs:	DL0GAS-11 DL0GAS-2 DL0GAS-5 DL0GAS-4 DL0GAS-6 DL0GAS-1 DL0GAS-3

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.