Comment:	LoRa APRS - RX only
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-08-04
Location:	48°00.71' N 8°27.35' E - lokaator JN48FA42QT - show map 5.6 km Läände peiling 260° from Bad Dürrheim, Baden-Württemberg, Germany [?] 6.3 km Edelasse peiling 207° from Villingen-Schwenningen, Baden-Württemberg, Germany 72.0 km Põhja peiling 354° from Zürich, Bezirk Zürich, Zurich, Switzerland 100.8 km Edelasse peiling 212° from Stuttgart, Regierungsbezirk Stuttgart, Baden-Württemberg, Germany
Last position:	2025-09-14 17:02:52 UTC (15h35m ago) 2025-09-14 19:02:52 CEST local time at Bad Dürrheim, Germany [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DK5AD-11>APLRG1 via TCPIP*,qAC,T2ERFURT
Positions stored:	1
Other SSIDs:	DK5AD-7 DK5AD-10
APRS igate – Statistics for 2025-09:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-09-11 15:38:38 UTC (3d 16h59m ago)
Position packets heard directly:	20 on radio path
Position packets sent to APRS-IS:	22 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.