Comment:	Bat=3.35V (571mA)
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2024.01.26
Location:	53°07.08' N 8°19.83' E - lokaator JO43DC98PH - show map 8.3 km Loodesse peiling 335° from Hatten, Lower Saxony, Germany [?] 9.1 km Läände peiling 271° from Hude, Lower Saxony, Germany 32.2 km Läände peiling 279° from Bremen, Bremen, Germany 120.7 km Edelasse peiling 247° from Hamburg, Hamburg, Germany
Last position:	2025-02-14 09:05:25 UTC (3h11m ago) 2025-02-14 10:05:25 CET local time at Hatten, Germany [?]
Altitude:	0 m
Speed:	12 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DG2BCP-9>APLRT1 via WIDE1-1,qAR,DG2BCP-L4
Positions stored:	40498
Other SSIDs:	DG2BCP-L4

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.