Comment:	iGate 2m RPi
Last status:	Running on Raspberry Pi with RTL_FM
Location:	52°24.29' N 12°54.78' E - lokaator JO62KJ97ND - show map 3.2 km Loodesse peiling 334° from Werder, Brandenburg, Germany [?] 8.1 km Kagusse peiling 148° from Ketzin, Brandenburg, Germany 36.2 km Läände peiling 249° from Berlin, Berlin, Germany 124.1 km Põhja peiling 17° from Leipzig, Direktionsbezirk Leipzig, Saxony, Germany
Last position:	2025-09-03 14:29:11 UTC (2m28s ago) 2025-09-03 16:29:11 CEST local time at Werder, Germany [?]
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	DG1RWA-11>APPM13 via TCPIP*,qAC,T2CZECH
Positions stored:	6
Other SSIDs:	DG1RWA-10 DG1RWA-7 DG1RWA-9 DG1RWA-12 DG1RWA DG1RWA-N DG1RWA-Y
APRS igate – Statistics for 2025-09:
Stations heard directly:	6 on radio path – show map
Last heard a station directly:	2025-09-03 14:27:05 UTC (4m34s ago)
Position packets heard directly:	93 on radio path
Position packets sent to APRS-IS:	1037 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.