Comment:	LoRa APRS IGate Perleberg
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-06-20
Location:	53°04.44' N 11°51.04' E - lokaator JO53WB27BS - show map 1.3 km Loodesse peiling 308° from Perleberg, Brandenburg, Germany [?] 6.4 km Kirdesse peiling 45° from Weisen, Brandenburg, Germany 121.3 km Loodesse peiling 301° from Berlin, Berlin, Germany 128.4 km Kagusse peiling 115° from Wandsbek, Hamburg, Germany
Last position:	2025-09-03 02:40:15 UTC (3m40s ago) 2025-09-03 04:40:15 CEST local time at Perleberg, Germany [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DB0PER-L>APLRG1 via WIDE1-1,qAS,DB0PER
Positions stored:	1
Other SSIDs:	DB0PER
Last heard a station directly:	2025-08-24 11:43:52 UTC (9d 15h ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.