Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	35°25.31' S 71°37.99' W - lokaator FF44EN48AS - show map 3.3 km Kirdesse peiling 67° from Talca, Provincia de Talca, Maule, Chile [?] 19.7 km Loodesse peiling 316° from San Clemente, Provincia de Talca, Maule, Chile 60.8 km Edelasse peiling 217° from Curicó, Provincia de Curicó, Maule, Chile
Last position:	2025-09-03 21:34:47 UTC (8h5m ago) 2025-09-03 17:34:47 -04 local time at Talca, Chile [?]
Altitude:	129 m
Speed:	107 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	CE3TKG-8>APLRT1 via WIDE1-1,qAR,CA4GHJ-10
Positions stored:	10965
Other SSIDs:	CE3TKG-N CE3TKG-10 CE3TKG CE3TKG-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.