Comment:	LoRa Rengo 2 - Hotspot DMR 146.355 CC1 Batt=3.84V
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2024.06.28
Location:	34°24.64' S 70°51.75' W - lokaator FF45NO61MK - show map 775.3 m Kirdesse peiling 30° from Rengo, Provincia de Cachapoal, O'Higgins, Chile [?] 20.4 km Idast peiling 83° from San Vicente, Provincia de Cachapoal, O'Higgins, Chile 91.9 km Lõunasse peiling 196° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile 107.8 km Lõunasse peiling 190° from Santiago, Provincia de Santiago, Metropolitana, Chile
Last position:	2025-09-01 17:26:01 UTC (9m52s ago) 2025-09-01 13:26:01 -04 local time at Rengo, Chile [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	CA4SLC-10>APLRG1 via WIDE1-1,qAO,CE4CVX-10
Positions stored:	2
Other SSIDs:	CA4SLC-C CA4SLC-7 CA4SLC-6 CA4SLC-5 CA4SLC-9 CA4SLC-09
Last heard a station directly:	2025-08-31 20:06:31 UTC (21h29m ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.