Comment:	LoRa IGate (Heltec V3) en prueba Batt=3.82V
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025.03.03
Location:	33°25.62' S 70°35.33' W - lokaator FF46QN97IM - show map 3.8 km Põhja peiling 348° from Villa Presidente Frei, Ñuñoa, Santiago, Chile, Provincia de Santiago, Metropolitana, Chile [?] 6.4 km Kirdesse peiling 59° from Santiago, Provincia de Santiago, Metropolitana, Chile 21.1 km Põhja peiling 359° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile
Last position:	2025-03-17 06:23:48 UTC (4m30s ago) 2025-03-17 03:23:48 -03 local time at Villa Presidente Frei, Ñuñoa, Santiago, Chile, Chile [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	CA3EDV-13>APLRG1 via WIDE1-1,qAO,CA3DJL-15
Positions stored:	1
Other SSIDs:	CA3EDV-10 CA3EDV-I3 CA3EDV-5 CA3EDV-11 CA3EDV-D1 CA3EDV-15 CA3EDV-2 CA3EDV-I2 CA3EDV-D3 CA3EDV-D2 CA3EDV-T1 CA3EDV-G1

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.