Comment:	digi.i-gate, LoRa Bladel
Location:	51°21.79' N 5°15.00' E - lokaator JO21PI07AD - show map 2.1 km Idast peiling 106° from Bladel, Gemeente Bladel en Netersel, North Brabant, Netherlands [?] 4.8 km Läände peiling 278° from Eersel, Gemeente Eersel, North Brabant, Netherlands 84.8 km Kirdesse peiling 47° from Brussels, (Bruxelles-Capitale), Brussels Capital Region, Belgium 127.8 km Loodesse peiling 293° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany
Last position:	2025-12-28 13:12:15 UTC (1m ago) 2025-12-28 14:12:15 CET local time at Bladel, Netherlands [?]
Device:	Microsat: WX3in1
Last path:	PI6BLA>APMI01 via WIDE2-2,qAO,PE1FTV-10
Positions stored:	406
Other SSIDs:	PI6BLA-12 PI6BLA-10 PI6BLA-1
APRS digipeater – Statistics for 2025-12:
Stations heard directly:	10 on radio path – show map
Last heard a station directly:	2025-12-28 04:48:02 UTC (8h25m ago)
Normal receiver range estimate:	80 km (Uuendatud: 2025-11-14 11:54:47 UTC)
Position packets heard directly:	80 on radio path

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.