Comment:	On a Dayton Advynture! [Freq MHz]
Mic-E message:	En route
Location:	40°02.09' N 85°44.92' W - lokaator EN70DA08DI - show map 9.9 km Kirdesse peiling 29° from Ingalls, Madison County, Indiana, United States [?] 14.2 km Kirdesse peiling 37° from Fortville, Hancock County, Indiana, United States 45.8 km Kirdesse peiling 50° from Indianapolis, Marion County, Indiana, United States 147.1 km Loodesse peiling 312° from Cincinnati, Hamilton County, Ohio, United States
Last position:	2025-09-05 10:27:55 UTC (4h29m ago) 2025-09-05 06:27:55 EDT local time at Ingalls, United States [?]
Altitude:	267 m
Course:	70°
Speed:	15 km/h
Device:	Kenwood: TM-D710 (rig)
Last path:	KB9SZX-9>TP0R0Y via W9ICE-10,WIDE1*,WIDE2-1,qAR,KD9LVX-1
Positions stored:	43447

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.