Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	53°04.43' N 11°51.62' E - lokaator JO53WB37FR - show map 903.8 m Loodesse peiling 332° from Perleberg, Brandenburg, Germany [?] 6.8 km Kirdesse peiling 49° from Weisen, Brandenburg, Germany 120.7 km Loodesse peiling 301° from Berlin, Berlin, Germany 129.0 km Kagusse peiling 114° from Wandsbek, Hamburg, Germany
Last position:	2025-09-10 07:19:08 UTC (11s ago) 2025-09-10 09:19:08 CEST local time at Perleberg, Germany [?]
Altitude:	50 m
Last telemetry:	2025-09-10 05:48:50 UTC (1h30m ago) – show telemetry Voltage: 4.050 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL3HSU-9>APLRT1 via WIDE1-1,qAO,DB0PER-L
Positions stored:	424
Other SSIDs:	DL3HSU DL3HSU-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.