Comment:	Beacon Testing
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025.03.20
Location:	48°50.47' N 13°10.74' E - lokaator JN68OU11LV - show map 196.1 m Kagusse peiling 128° from Hunding, Regierungsbezirk Niederbayern, Bavaria, Germany [?] 2.9 km Idast peiling 99° from Lalling, Regierungsbezirk Niederbayern, Bavaria, Germany 100.8 km Loodesse peiling 307° from Linz, Upper Austria, Austria 141.6 km Kirdesse peiling 56° from München (Muenchen), Regierungsbezirk Oberbayern, Bavaria, Germany
Last position:	2025-09-03 13:35:21 UTC (2d 14h38m ago) 2025-09-03 15:35:21 CEST local time at Hunding, Germany [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DC2MI-10>APLRG1 via WIDE1-1,qAR,DA6RF-10
Positions stored:	1
Last heard a station directly:	2025-06-06 19:28:48 UTC (91d 8h45m ago)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.